Ubiquiti NanoBridge M3 3.3-3.7GHz
Software
AirOS
AirOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking.
Protocol Support
Ubiquiti Channelization
Spectral Width Adjustment
ACK Auto-Timing
AAP Technology
Multi-Language Support
AirView
Integrated on all Ubiquiti M products, AirView provides Advanced Spectrum Analyzer Functionality: Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
Waterfall – Aggregate energy over time for each frequency.
Waveform – Aggregate energy collected.
Real-time – Energy is shown real-time as a function of frequency.
Recording – Automize AirView to record and report results.
airControl
AirControl is a powerful and intuitive web based server network management application which allows operators to centrally manage entire networks of Ubiquti devices.
Network Map
Monitor Device Status
Mass Firmware Upgrade
Web UI Access
Manage Groups of Devices
Task Scheduling
Specifications
System Information
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet
Regulatory / Compliance Information
Wireless Approvals: N/A
RoHS Compliance: Yes
Physical / Electrical / Environmental
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting Kit: Pole Mounting Kit included
Power Supply: 24V, 1A POE Supply included
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Operating Temperature: -30C to 75C
Operating Humidity: 5 to 95% Condensing
Shock and Vibration: ETSI300-019-1.4
Dimensions: 492 x 440 x 705 mm
Weight: 900g
Max Power Consumption: 8 Watts
Antenna Gain: 21.5 – 22.5 dBi