MAX HD1 DOME-5GD
El domo HD1 proporciona enlace de ancho de banda de un solo celular, cuenta con protección IP67. Con SIM redundante, el domo HD1 admite radios celulares individuales y dos tarjetas SIM. Combine el HD1 Dome con el SIM Injector y el número de tarjetas aumenta a diez.
8 SIM adicional con el inyector SIM Con la adición del inyector SIM, el domo HD1 puede admitir hasta 10 SIM al alcance de su mano. Simplemente conecte un cable Ethernet entre el inyector SIM y el domo HD1. El SIM Injector tiene capacidad de salida PoE, por lo que no necesita agregar otro conmutador PoE a su implementación.
Especificaciones Técnicas
| Product Code | MAX-HD1-DOM-M-GLTE-G |
| WAN celular | Compatibilidad con DHCP Comprobación del estado del enlace WAN Monitor de ancho de banda Compatibilidad con servicios de DNS dinámico |
| LAN Ports | 2 (10G SFP+) |
| USB WAN Modem Port [1] | 1 |
| Recommended Users [2] | 5000-20000+ |
| Stateful Firewall Throughput [3] | 8Gbps |
| 802.1q VLANs Supported | 1024 |
| Port-Based VLAN | Yes |
| Load Balancing & Failover | Yes |
| Load Balancing Algorithms | 8 |
| Drop-In Mode | Yes |
| Inbound Load Balancing | Yes |
| InControl Cloud Management | Yes |
| PepVPN | Yes |
| SpeedFusion Hot Failover | Yes |
| SpeedFusion WAN Smoothing | Yes |
| SpeedFusion Bandwidth Bonding | Yes |
| Number of PepVPN/SpeedFusion Peers [4] | 4000 |
| PepVPN Throughput (256-bit AES)/(No Encryption) [3] | 2Gbps |
| IPsec VPN (Network-to-Network) [5] | Yes |
| Number of IPsec Tunnels | 800 |
| Remote User Access | Yes |
| L2TP VPN Server | Yes |
| OpenVPN Server | Yes |
| PPTP VPN Server | Yes |
| Recommended PPTP/L2TP/OpenVPN Users | 1000 |
| GRE (Network-to-Network) | 5 |
| Pepwave AP Series Management | Yes |
| Maximum Number of AP Supported | 1500 |
| Remote AP & Multiple Config Profiles Management [6] | Yes |
| Bandwidth Usage Monitor | Yes |
| QoS for VoIP and E-Commerce | Yes |
| User Groups Bandwidth Control | Yes |
| Web Blocking | Yes |
| Web Filtering Blacklist | Full |
| Operating Temperature | 32° – 104°F / 0° – 40°C |
| LACP (802.3ad) NIC Bonding | Yes* |
| Power Consumption | 230W |
| Dimensions | 20 x 17 x 1.73 inches | 508 x 432 x 44 mm |
| Weight | 20.2 pounds | 9.14 kg |
| High Availability | Yes |
| LAN Bypass | Yes |
| Dual Hot Swap | Yes |
| FCC, CE, RoHS | Yes |
| Warranty | 1-Year Limited Warranty |
[1] For a list of supported modems, please refer to https://www.peplink.com/technology/4g3g-modem-support/.
[2] Recommendation for sizing purposes only. No software restrictions applied.
[3] Router Throughput and PepVPN/SpeedFusion Throughput is based on Ethernet frame sizes of 1280 or 1518 bytes. Actual performance can vary across different networking environments. Figures apply to the latest hardware revision.
[4] Number of peer Peplink or Pepwave devices you can connect using SpeedFusion VPN.
[5] IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices.
[6] Balance 20/30 LTE/One/210/310 comes with AP Controller Standard, which supports up to two configuration profiles with multiple SSIDs, meaning that all APs will share the same configuration, and you can only manage APs on the local physical LAN. Balance 305/380/580/710/1350/2500 comes with AP Controller Pro, which supports multiple configuration profiles with multiple SSIDs, and you can manage remote APs outside the local physical LAN.
* Balance 2500 are available different configurations. Please refer to ordering information for details.
