El EAP757 es el nuevo modelo de puntos de acceso de interior de 4ipnet, con un
diseño elegante permite ser instalado en hoteles de forma discreta (como si de un detector de incendios por ejemplo) en nuestras instalaciones.
Es un punto de acceso que trabaja en 2,4GHz o 5GHz en función de como lo configuremos. Con una interfaz de red Gigabit y datarates de hasta 300Mbps en su interfaz Mimo 2×2 Wireless y antenas tipo patch integradas.
Como todos los puntos de acceso de interior de 4ipnet, incorpora el botón de 4ipWES para realizar los enlaces WDS entre equipos de 4ipnet con un simple click, haciendo que es despliegue y configuración para expander la señal Wifi sea muy rápido.
Incorpora una nueva funcionalidad para analizar los canales Wireless para detectar los canales más limpios y si hay fuentes de interferencia.
Especificaciones técnicas
Wireless Radio
- Wireless Interface: 1 x IEEE 802.11a/b/g/n
- Frequency band: 2.4 GHz and 5 GHz
Wireless architecture
- AP mode
- WDS mode (Repeater/Bridge)
Modulation
- OFDM (64-QAM, 16-QAM, QPSK, BPSK)
- DSSS (CCK, DBPSK, DQPSK)
Channels
- USA (Channel 1~11)
- Japan (Channel 1~14)
- Europe (Channel 1~13)
Data rate with auto fallback
- 802.11a: 6 ~ 54 Mbps
- 802.11b: 1 ~ 11 Mbps
- 802.11g: 6~54 Mbps
- 802.11n: 6.5~300 Mbps
Transmit Power
- 802.11a: Up to 22dBm
- 802.11b: Up to 22dBm
- 802.11g: Up to 24dBm
- 802.11an: Up to 22dBm
- 802.11gn: Up to 22dBm
Receiver Sensitivity
- 802.11a: -95dBm@6Mbps
- 802.11b: -95dBm@1Mbps
- 802.11g: -95dBm@6Mbps
- 802.11n: 802.11an HT20: -95dBm@MCS0
- 802.11an HT40: -91dBm@MCS0
- 802.11gn HT20: -95dBm@MCS0
- 802.11gn HT20: -90dBm@MCS0
QoS-WMM
- DiffServ/TOS
- IEEE 802.1p/COS
- IEEE 802.1Q Tag VLAN priority control
- IEEE 802.11e WMM
Handover & Roaming
- IEEE 802.11f IAPP
- IEEE 802.11i pre-auth (PMKSA cache)
Security
- WEP (64/128/152 bits)
- EAP-TLS + Dynamic WEP
- EAP-TTLS + Dynamic WEP
- PEAP/MS-PEAP + Dynamic WEP
- WPA (PSK + TKIP)
- WPA (802.1X certification + TKIP)
- 802.11i WPA2 (PSK + CCMP/AES)[
- 802.11i WPA2 (802.1X certification + CCMP/AES)
- TKIP/CCMP/AES key’s refreshing period
- Hidden ESSID support
- MAC Address filtering (MAC ACL)
- MAC authentication with RADIUS servers
- Maximum number of registered RADIUS servers: 2
r
System Management
- Web-based administration
- SNMP v1/v2c
- Provides Event Log
- SYSLOG information support
- Statistics
- Configuration backup and restore
- One-button-click to restore factory default setting
- Firmware upgrade
- Capable of performing RADIUS
Accounting and Accounting Update - 4ipWES (Press-n-Connect) button for WDS Easy Setup
- Support Tunneled AP Management with 4ipnet Secure WLAN Controllers
- IPv6*
- Ethernet LAN Port Mapping (with a 4ipnet controller)
- Channel Analysis in the 2.4GHz Band
Built-in Servers & Client Interfaces to Other Services
- DHCP client
- DNS client
- SYSLOG client
- RADIUS client
- SNMP v1/v2c client
Wireless Signal Management
- Number of ESSIDs (Virtual APs): 8
- Number of associated clients per VAP: 32
- Setting for maximum number of associated clients
- Network policy based on ESSID
Hardware Specifications
- Uplink Port: 1 × 10/100/1000 Base-T pass-through Ethernet with
IEEE 802.3af PoE - LAN Port: 2 × 10/100/1000 Base-T Ethernet
- Phone Socket: 1 x pass-through RJ11
- Push buttons: 1 x Reset, 1 x WES
- LED Indicators: 1 x Power, 1 x Status, 1 x WLAN, 1 x WES
- Kensington Lock
Built-in Dual band Antenna x 2
- 2dBi at 2.4GHz
- 5dBi at 5GHz
Physical and Power
Power Adaptor (no incluido)
- (1)AC Input: 100~240 VAC, 50~60 Hz
- (2)DC Output: 12V / 2A
Alternative Power
- (1)802.3af PoE (PSE not included)
- Form factor: wall mountable mini-book
- Dimensiones (W x D x H): 7.2″ x 7.2″ x 2.4″ (182 mm x 182 mm x 60 mm)
- Peso: 1.2 lbs (0.
22 kg)
Environment
- Operation Temperature: -30 ~ +70 °C (32 ~158 °F)
- Storage Temperature: -40 ~ +85 °C (-40~185 °F)
- Operation Humidity: 10% ~ 80% (Non-condensing)
- Storage Humidity: 5% ~ 90% (Non-condensing)
Certifications
- FCC
- CE
- RoHS compliant
